The Number One Sealant Solution, "Since 1978"

Hoses

Die Identification

Key

EPDM

Neoprene*

Nitrile

Dense

Non Stock Item

(Minimum Requirements)

New Part Added

A "W" included in the

part number or the word

"White" indicates that the

part is white.  All other

 parts are black.

* It is recommended that

only 3M HATS adhesive

be used with all

Neoprene profiles.

A replacement for hose on most cars and light trucks. This standard grade hose is similar to SAE20R3 Class D2 for normal duty service. Withstands the abuse of corrosive solutions and additives. Resists weathering to provide a long, trouble-free service life.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Heater

Black

Black Standard

SAE20R3 Class D2

Black

 

EPDM

Two Spiral Polyester

EPDM

-40 Degrees F to +212 Degrees F

Black Standard Heater Hose

Black Standard Heater Hose

Both manufacturer and distributor specifically, but not by way of limitation, disclaims any and all liability for the use of performance of the products in application(s) other than those applications specified for such product(s) on this website and any such non-specified use voids any otherwise applicable warranty and is at the purchaser's sole risk and liability.

Nomex World Spec Heater Hose

A replacement for OE hose on all FORD cars, as well as heavy and light trucks chassis. This high quality hose is made from flame retardant Nomex materials and meets or exceeds WSEM96D34-A4 for higher under hood temperatures. Withstands the abuse of corrosive solutions and additives. Resists weathering to provide a long, trouble-free service life.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Heater

Black

Black Standard

WSEM96D34-A4

Black

 

EPDM

Two Spiral Polyester

EPDM

-40 Degrees F to +212 Degrees F

Nomex World Spec Heater Hose

Gas Tank Fuel Fill Hose

Designed for connection between gas tank and filler neck on automotive vehicles.  This special hose handles leaded, unleaded, alcohol-added, diesel,  and ethanol based fuels.  Resists heat, weather, abrasion and ozone.

Gas Tank Fuel Fill Hose

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Fuel Line

Gas Tank Filler

N/A

SAEJ1527 Type A2

Black with Red Stripe

 

Nitrile

Spiral Polyester Cord

Poloychloropene

257 Degrees F

Soft Wall Fuel Fill Hose

This hose meets the same standards as our gas tank fill hose, but is not wire re-enforced.  It is an excellent product when used in a "straight run" from the fuel tank to the filler neck.  This provides a production friendly connection application.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Fuel Line

Gas Tank Filler

N/A

SAEJ1527 Type A2

Black with Red Stripe

 

Nitrile

N/A

Poloychloropene

257 Degrees F

Soft Wall Fuel Fill Hose

Low Perm Tier III Carb Hose

Low Perm Tier III CARB Hose

Our low permeable fuel line is more cost efficient alternative for those companies wanting to meet the California Air Resources Board (CARB) requirements.  While some applications are mandatory to meet the more stringent requirements listed under Executive Orders G-05-018.  CARB LEV II Low Perm Hose is a suitable low-permeation replacement for most standard SAE30R7 applications.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Fuel Line

700 Series CARB LEV II Low Perm Hose

N/A

SAE30R7 CARB Tier III

Black

 

Nitrile Rubber

THV Barrier

CSM (Hypalon)

-40 Degrees F +257 Degrees F Continuous

SAE30R9 CARB LEV II Approved Hose

SAE30R9 CARB LEV II Approved Hose

Our SAE30R9 Fuel Injection Hose has been approved by Executive Order C-U-05-002 for use under the CARB LEV II specifications.  This hose is also designed for the extremely high temperatures generated by today's fuel injection engines.  This hose handles leaded, unleaded, alcohol added, diesel, and extended gasolines, resisting sour fuel oxidation.  This product is designed for use in the RV, Off Road, and Mass Transit (Bus) Industries.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Fuel Line

Fuel Injection (SAE30R9)

N/A

SAE30R9/CARB LEV II

Black

 

Fluroelastomer

Two Spiral Aramid Fiber

CSM

-29 Degrees F +275 Degrees F (+302 Degrees F Intermittent)

Standard Premium Fuel Line

Standard Premium Fuel Line

Designed for conveying most modern fuels in cars, trucks, buses, etc.  Handles temperature ranges of -40 to +257 Degrees F.  Withstands oil, grease, abrasion and ozone. An excellent product for all diesel based fuels.  Meets or exceeds the burst requirements of the SAE30R7 specification.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Fuel Line

SAE30R7

N/A

SAE30R7

Black

 

Nitrile

Two Spiral Polyester

Nitrile/PVC

-40 Degrees F +257 Degrees F (+302 Degrees F Intermittent)

Gas Tank Vent Hose

Gas Tank Vent Hose

A low pressure hose built to handle gasoline vapor, carbon monoxide exhaust fumes and engine heat.  The cover resists oil, grease, abrasion and ozone, providing extended service life.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Fuel Line

Gas Tank Filler

N/A

Similar to SAEJ30R7

Black

 

Nitrile

Two Spiral Polyester

CSM

257 Degrees F

Air Conditioning Hose

GoodYear Galaxy Air Conditioning Hose 4826

 

*Two Polyester Spiral Barrier Hose

*J51 All Outside Diameters

*Temperature Range -40 to +257 Degrees F

*Compatible with:

                     *R-12/R134A Refrigerants

                     *Mineral Oil, PAG's

*Meets J2064 "TYPE C Class II" Hose Performance

*Low Volumetric Expansion

*Dimensionally Stable

*Flexible - Easy to Route

Air Conditioning Hose

Molded Hoses

Our molded hoses come in a wide range of shapes and size requirements.  These hoses can be made for use in fuel systems meeting the various SAE30R7, SAE J1527, and the CARB LEV II fuel ratings required.  Many of the more traditional SAE20R3 D2 and the SAE20R1 Class B engine coolant molded hoses are also in stock.

Please contact your customer service representative for more details and availability.

Molded Hoses

Heavy Duty Air Hose

Heavy Duty Air Hose

A multi-purpose hose designed for tough general service air and water applications.  It features an EPDM tube and cover with a four spiral polyester reinforcement that keeps the hose kink resistant and flexible in extreme temperatures.  The cover is resistant to abrasion, weathering and ozone.  Rated at 200 to 300 PSI working pressure.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Air

Heavy Duty Bulk Air

N/A

N/A

Red

 

EPDM

Four Spiral Polyester

EPDM

-40 Degrees F to +212 Degrees F (not for steam use)

Push - On Air Hose

Push - On Air Hose

This high quality hose can be used by all industries.  It has a Class A high oil resistant tube and cover that offers excellent resistance to oil and petroleum based products.  It has excellent coupling retention.  It holds the special fitting tightly and safely.  With an easy push, the spiral hose design grips the fitting securely and maintains a constant internal holding action.  The fitting will not give, even under full working pressure.  Not recommended for unleaded gasoline.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Air

Push-On Hose

N/A

N/A

Black, Blue, Gray, Red, or Yellow

 

Nitrile

Two Spiral Aramid Fiber

Nitrile/PVC Blend

-30 Degrees F to +160 Degrees F (180 Degrees F Intermittent)

Windshield Wiper/Vacuum Tubing

Windshield Wiper/Vacuum Tubing

Low pressure EPDM tubing for windshield washers, vacuum and emissions systems for power accessories.  Meets SAE J1037

specifications.  Will not deteriorate from heat, weathering or ozone.  Maintains its flexibility even at low temperatures.

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Windshield Wiper/Vacuum

N/A

N/A

SAE J1037

Black

 

EPDM

None

N/A

-40 Degrees F to +257 Degrees F (not for steam use)

Engine Coolant Hose

A general purpose, low pressure coolant and heater connector built for long lasting performance at temperature ranges of 0 to +212 Degrees F.  Resists aging, ozone, chemicals and lubricants.

Engine Coolant Hose

Application:

Style:

Grade:

Specifications:

Cover Color:

Construction

   Tube:

   Reinforcement:

   Cover:

Temperature Resistance:

Engine Coolant

Black

General Purpose Coolant

SAEJ2006

Black

 

Nitrile/SBR Blend

3 PLY Nylon Screen

Nitrile/SBR Blend

0 Degrees F to +212 Degrees F

Clean Seal, Inc.

20900 W. Ireland Rd.

P.O. Box 2919

South Bend, IN 46680-2919

Phone

574.299.1888

Fax

574.299.8044

 

Toll Free

800.366.3682

Email

cleanseal@cleanseal.com

 

We Accept:

 

©2017 Clean Seal and its licensors.  All rights reserved.